Moldings

Banner Image

Moldings are manufactured by Indusparquet for our Classico, Valor, and Solido collections only. Moldings for our other collections are made by our partner, Artistic Finishes, and may have slightly different profile dimensions from what is listed below.

1/2″ Moldings

1/2 Reducer Molding Diagram Reducer

Reducers are used when the two floors of different heights meet. This transition piece has a rounded off square edge appearence.

1/2 Noising Molding Diagram Nosing

Stair nosings add a finished look to the end of the steps with hardwood flooring.

1/2 Threshold Molding Diagram Threshold

Thresholds smoothly transition the hardwood flooring to the other type of surface installed with a different height, such as carpet or vynil.

1/2 T-Molding Diagram T-Molding

T-moldings provide a solution when transitioning between floor surfaces in adjoining rooms. It is very important that the two surfaces have the same height.

1/2 Quarter Round Molding Diagram Quarter Round

Quarter Round provides a transition between the wall base and the hardwood flooring.

3/4″ Moldings

3/4 Reducer Molding Diagram Reducer

Reducers are used when the two floors of different heights meet. This transition piece has a rounded off square edge appearence.

3/4 Noising Molding Diagram Nosing

Stair nosings add a finished look to the end of the steps with hardwood flooring.

3/4 Threshold Molding Diagram Threshold

Thresholds smoothly transition the hardwood flooring to the other type of surface installed with a different height, such as carpet or vynil.

3/4 T- Molding Diagram T-Molding

T-moldings provide a solution when transitioning between floor surfaces in adjoining rooms. It is very important that the two surfaces have the same height.

3/4 Quarter Round Molding Diagram Quarter Round

Quarter Round provides a transition between the wall base and the hardwood flooring.

3/8″ Moldings

3/8 Reducer Molding Diagram Reducer

Reducers are used when the two floors of different heights meet. This transition piece has a rounded off square edge appearence.

3/8 Noising Molding Diagram Nosing

Stair nosings add a finished look to the end of the steps with hardwood flooring.

3/8 Threshold Molding Diagram Threshold

Thresholds smoothly transition the hardwood flooring to the other type of surface installed with a different height, such as carpet or vynil.

3/8 T- Molding Diagram T-Molding

T-moldings provide a solution when transitioning between floor surfaces in adjoining rooms. It is very important that the two surfaces have the same height.

3/8 Quarter Round Molding Diagram Quarter Round

Quarter Round provides a transition between the wall base and the hardwood flooring.

5/8″ Moldings

5/8 Reducer Molding Diagram Reducer

Reducers are used when the two floors of different heights meet. This transition piece has a rounded off square edge appearence.

5/8 Noising Molding Diagram Nosing

Stair nosings add a finished look to the end of the steps with hardwood flooring.

5/8 Threshold Molding Diagram Threshold

Thresholds smoothly transition the hardwood flooring to the other type of surface installed with a different height, such as carpet or vynil.

5/8 T- Molding Diagram T-Molding

T-moldings provide a solution when transitioning between floor surfaces in adjoining rooms. It is very important that the two surfaces have the same height.

5/8 Quarter Round Molding Diagram Quarter Round

Quarter Round provides a transition between the wall base and the hardwood flooring.